How to maintain solid wood furniture is a difficult problem. More and more families begin to buy solid wood furniture, but solid wood is also a "delicate" furniture. Wrinkles and cracks don't look good. So how to maintain solid wood furniture? Here are some methods for maintaining solid wood furniture

The heat resistance of solid wood furniture is generally poor, so it should be kept away from the heat source as far as possible. In general, try to avoid direct sunlight, because strong ultraviolet rays will cause the paint surface of solid wood furniture to fade; In addition, heating and lamps that can emit strong heat will also deform solid wood furniture, which should be kept away as far as possible; Moreover, don't directly put hot water cups, teapots and other things on solid wood furniture, otherwise it will burn solid wood furniture.

Although solid wood furniture is durable, its paint is very easy to fade. To this end, we must often wax the furniture. You can use a wet rag dipped in some neutral detergent to gently wipe the furniture surface. When wiping, you should follow the texture of the wood. After cleaning, you can use a dry rag or sponge dipped in professional wood wax to wipe. Waxing should take the center as the origin, first around and then in the middle. However, waxing is best not to be too frequent, preferably 1-2 times a year.

Mortise and tenon structure is very important for solid wood furniture. Once it is loose and falls off, solid wood furniture can not continue to be used. Therefore, pay attention to check whether these joints have parts falling off, degumming, tenon fracture, tenon loosening, etc. If the screw and other parts fall off, clean the screw hole first, then fill a thin wooden strip in the hole, and finally reinstall the screw. If the tenon is broken, it needs to be handled by professional maintenance personnel.

In winter, the indoor humidity is higher than that outside. Therefore, opening windows for ventilation in winter will only bring in the cold air outside and make the room drier. Therefore, it is suggested that families with more solid wood furniture should reduce the time and times of opening windows for ventilation in winter to maintain the appropriate indoor humidity. At the same time, it should be noted that solid wood furniture should not be placed in the vent.

It's cold in winter. In order to keep warm, each family will bring its own heater. Sometimes in order to get closer to the heat source, the heater is unconsciously pulled to the solid wood furniture. As everyone knows, these furniture are afraid of high temperature. If they are baked at high temperature for a long time, it is easy to make the wood lose moisture, local dry crack and deformation occur, and the paint film deteriorates. It is best to place solid wood furniture at least 1 meter away from the heater.